1.3SETUP
Read the Operation Manual before setting up the Total Body Trainer.
ELECTRICAL POWER REQUIREMENTS
The Total Body Trainer requires an AC power supply according to the electrical configurations listed in the chart below.
Supply Voltage | Frequency | Rated Current |
(VAC) | (Hz) | (Amps) |
100 | 50 / 60 | 1.6 |
110 | 50 / 60 | 1.6 |
120 | 50 / 60 | 1.6 |
200 | 50 / 60 | .8 |
220 | 50 / 60 | .8 |
230 | 50 / 60 | .8 |
240 | 50 / 60 | .8 |
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet, have a proper outlet installed by a qualified electrician.
HOW TO POSITION AND STABILIZE THE TOTAL BODY TRAINER
Following all safety instructions in Section 1.1, move the Total Body Trainer to the location in which it will be used. See Section 7, titled Specifications, for the footprint (product dimensions). Allow one foot of clearance in front of the Total Body Trainer to allow for movement of the pedal levers. It should be easy to mount the Total Body Trainer from the side.
After placing the Total Body Trainer in position, check the unit’s stability by attempting to rock it. Any slight rocking indicates that the unit must be leveled. Check the front stabilizing feet to determine which foot does not rest fully on the floor. Rotate the foot
Lock the adjustment into position by tightening the jam nut against the stabilizer bar with an open end 17mm wrench.
8
