5MANAGER CONFIGURATIONS
5.1 ENTERING AND USING THE MANAGER CONFIGURATION SETTINGS
Fitness club managers and other authorized personnel can use the Manager Configurations feature to change default settings or to
enable or disable certain workouts or displays on the Life Fitness exercise equipment.
22
Setting Default Value Description
MAX WORKOUT 60 minutes This is the maximum possible duration for a workout. The value can range from10 to 99.
DURATION
ENGLISH/METRIC ENGLISH This option determines the units used for entering weight and measuring distance.
UNITS
WATTS DISPLAY DISABLED If this option is enabled, the MESSAGE CENTER displays the of Watts equivalent
ENABLE/ pedaling rate.
DISABLE
METS DISPLAY DISABLED If this option is enabled, the MESSAGE CENTER displays the METs equivalent of the
ENABLE/ pedaling rate.
DISABLE
CAL/HR DISPLAY DISABLED If this option is enabled, the MESSAGE CENTER displays the number of calories
ENABLE/ burned per hour during the workout.
DISABLE
SLEEPTIMER ON 60 SECONDS Enables the LEDscreen backlight to be turned off due to inactivity (non-treadmill products).
PAUSETIME 60 SECONDS The amount of time the unit can be inactive before it reverts back to the workout summary.
The range is between 1 and 99 minutes.
MARATHON MODE DISABLED Enable/Disable Marathon Mode.
DEFAULTLANGUAGE SETUP ENGLISH Select a language as the default upon an exit from diagnostics.
USER LANGUAGE SELECT DISABLED This option, if enabled, gives users the ability to select
a language for use during a workout. See the topic
entitled User Language Select, in this section.
TELEMETRY ENABLED This feature makes it possible to use the Polar-compatible Heart Rate Zone Training
exercise chest strap for monitoring heart rate.
QUICK STARTKEYS ENABLED Enable/Disable a method to enter a Quick Start workout associated with (treadmills)
walk, jog, and run keys.
STATISTICS N/A Press any UP arrow key to display information including cumulative hours the equipment
was used, the number of times specific workouts were started, and cumulative distance.
MAX INCLINE 15% The maximum incline available to the users for the purpose of workout (treadmills)
programming and execution.
STRIDE SENSOR ENABLED This feature automatically pauses the workout if the user steps off the (treadmills) belt.
ACCELERATION RATE 3 Set the acceleration rate.(treadmills)
DECELERATION RATE 3 Set the deceleration rate.(treadmills)
BELTNOTIFICATION DISABLED If enabled, this options will alert a fitness club manager if a belt notification
(treadmills) exists.
MINSPEED 0.5 MPH The minimum speed available to the users for the purpose of workout (treadmills)
programming and execution.
MAX SPEED 10 MPH The maximum speed available to the users for the purpose of workout (treadmills)
programming and execution.