
STEP 3
Code the Meter.Immediately press the button, while the code number is displayed on meter to select the correct code. Each time you press and release
the button, the number will increase by one. To move more quickly, press and hold the
button.
Note: If the apply blood symbol is displayed before the meter is coded correctly, remove the test strip and repeat steps 1 through 3.
Note: If you scrolled past the desired code
number, continue to press the button until the correct code number appears.
After selecting the correct code number, it will flash for three seconds and then appear solid for three seconds.
CAUTION: Matching the code on the meter and the code on the test strip vial is essential to obtain accurate results. Each time you test, check to make sure the code numbers match.
Then the symbol will appear with mg/dL, indicating that the OneTouch® Ultra® System is ready for testing.
WARNING: If mg/dL does not appear with the symbol, call LifeScan Customer Service at 1 800
Example
Example
12