Lifescan Ultra Insert a test strip into the meter

STEP 1

Insert a test strip into the meter.

WARNING: If mg/dL does not appear with the R symbol, call LifeScan Customer Service at 1 800-227-8862.

➧

Insert a test strip, contact bars end first and facing up, into the test port. Push it all the way in until it will go no further. The meter will turn on and the display check will appear briefly.

Then the code number will appear, followed by the R symbol and mg/dL. Be sure the meter and test strip codes match. If they do not, code the meter correctly. (See pages 10 –12.)

15