STEP 1

Remove the OneTouch® UltraSoft® Cap from the Sampler.

Twist the OneTouch® UltraSoft® Cap counter- clockwise. (Optional: Replace the protective disk on the used lancet by placing it on a hard surface and pushing the lancet tip into the disk.)

STEP 2

Eject the Lancet.

Point the Sampler down and away. Push the release button to ensure that the Sampler is not cocked. Push forward on the ejection/cocking control and eject the lancet directly into a con- tainer for sharp objects. Return the ejection/cocking control to the middle position. Replace the OneTouch® UltraSoft® Cap.

Special Messages

The OneTouch® Ultra® Meter displays results between 20 and 600 mg/dL. If your blood glucose test result is lower than 20 mg/dL, lo will appear on the meter display. This may mean severe hypoglycemia (low blood glucose) that requires immediate treatment according to your healthcare professional’s recommen- dations. Although this message could be due to a test error, it is safer to treat first, and then repeat the test.

32