Lifescan Ultra Measure, Place the Cover, Remove the Old Battery, Check the Time, Date, and Unit of, Always confirm the unit of measure is mg/dL

RENATA

SWISSMADE

T39T9

T42

Blood Glucose Meter

AW 060-213-02A

STEP 2

Remove the Old Battery.

Pull upward on the clear plastic tab. Insert one 3.0 V (#2032 or equivalent) lithium bat-

tery, making sure the positive “+” side of the battery is facing up.

STEP 3

Place the Cover.

Place the cover over the battery compartment. Push down until you hear the tab click into place.

ARENAT +

SWISSMADE

T39T9

T42

STEP 4	Blood Glucose Meter
	AW 060-213-02A
Check the Time, Date, and Unit of
Measure.

After replacing the battery, turn the meter on by inserting a test strip or


pressing the		button. If the meter is in setting mode, confirm that the
time, time format and date are set correctly. If they are not, use the
and	buttons to reset the meter before testing. See Meter Set-up, pages

40–45. Also, be sure to confirm the unit of measure is mg/dL.

WARNING: The mg/dL unit of measure is the standard in the United States. If mg/dL does not appear, call LifeScan Customer Service at 1 800 227-8862.

Note: Replacing the battery does not affect previous test results stored in memory. However, the time and date settings may need to be updated.

Always confirm the unit of measure is mg/dL.