Lincoln Electric SAE-300 manual Wire Feeder Options

C-2 ACCESSORIES C-2

WIRE FEEDER OPTIONS

Wire Feed Module K623-1

Provides constant voltage (CV) output with improved arc stability for Innershield welding. Excellent for MIG welding. Recommended wire feeders are the LN-7, LN-23P and LN-25.

Remote Control Kit K2464-1

(Stick & Wire)

For Classic® and Pipeliner® machines that have the wire feed module. Contains a rheostat for stick output, a potentiometer for wire output and 100 ft. (30 m) of control cable.

LN-25 PRO Wire Feeder K2613-1

Portable CC/CV unit for flux-cored and MIG welding with MAXTRAC® wire drive system. Includes Gas Solenoid & Internal Contactor. Requires Wire Feed Module.

Magnum® 350 Innershield Gun for LN-25 K126-12 For self-shielded wire with 15 ft. (4.5m) cable. For

.072”(1.9mm) (5/64” (2.0mm) wire.

Magnum® PRO 350 Ready-Pak® K2652-2-10-45 15 ft., .035-5/64 in.

Magnum® PRO MIG/flux-cored welding guns are rated 100% duty cycle. The guns are designed for high amperage, high duty cycle applications in extreme environments where heat-resistance and fast serviceability are key.

Drive Roll and Guide Tube Kit (for LN-25 PRO) KP1697-068 for .068-.072 in. (1.8 mm) KP1697-5/64 for 5/64 in. (2.0 mm)

For cored or solid steel wire.

Magnum® 300 MIG Gun and Cable Package LN-25 PRO K1802-1 (includes K466-1 Connector Kit)

For .035-.045 in. (0.9-1.2 mm) gas-shielded wire with 15 ft. (4.5 m) cable.

Drive Roll and Guide Tube Kit (for LN-25 PRO) KP1696-1

For .035 in. and .045 in. (0.9 mm and 1.1 mm) solid steel wire.

Magnum Spool Gun K487-25

Hand held semiautomatic wire feeder requires SG Control Module. 25 ft. length.

SG Control Module K488 (For Magnum Spool Gun)

The interface between the power source and the spool gun. Provides control of wire speed and gas flow.

Input Cable K691-10 ( For SG Control Module)

For Lincoln engine drives with 14-pin MS-type con- nection, separate 115V NEMA receptacle and output stud connections. 10 ft. length.

SAE-300®