Recommended Processes and Equipment | Lincoln Electric TIG 375

B-2	OPERATION	B-2

RECOMMENDED PROCESSES AND EQUIPMENT

RECOMMENDED PROCESSES

The Precision TIG 375 is recommended for the TIG (GTAW) and Stick (SMAW) welding processes within its output capacity range of 2 amps DC, or 5 amps AC, to 420 amps AC/DC. It is compatible with most Magnum TIG accessories (refer Equipment Limitations), as well as many industry standard items, such as TIG torches, hoses, and water coolers.

PROCESS LIMITATIONS

Precision TIG machines are not recommended for arc gouging due to it's limited output capacity, and are also not recommended for pipe thawing.

EQUIPMENT LIMITATIONS

The Precision TIG machines are protected from over- loads beyond the electrical ratings and duty cycles, per the Specifications Section A-1, A-2, with Thermostat protection of the primary and secondary transformer coils.

The Precision TIG machines do not have Hi-Frequency available at the Stick electrode stud, therefore stud connection adapters (such as LECO. S19257-series) cannot be used for torch connection.

	RECOMMENDED EQUIPMENT/INTERFACE
	TIG (water cooled)	TIG (air cooled)
Machine:	PT375 Welding Package (K2624-1)	PT375(K2622-1, -2)
Input Cable/Clamp:	User provided	User provided
Gas Reg./Hose:	(included)	LE/Harris 3100211
Magnum Torch:	(PTW20 included)	PTA9 or PTA17
Magnum Parts:	(KP510 and K918-2 included)	KP507 or KP508
Work Clamp/Lead:	(15 ft. included)	K2150-1 Work Lead Assembly
Foot Amptrol:	(K870 included)	K870

PRECISION TIG 375

Image 17

Lincoln Electric TIG 375 manual Recommended Processes and Equipment, Process Limitations, Equipment Limitations

Contents

Precision TIG Safety Depends on You California Proposition 65 Warnings Safety Electric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosion Sûreté Pour Soudage a LʼArc Précautions DE Sûreté Thank You Table of Contents Rated Input Single Phase only InstallationDuty Cycle-Applications Volts at Rated Amperes Amps Precision TIG Physical Dimensions Recommended Input Wire and Fuse SizesTemperature Ranges Additional Output Capacity Safety Precautions Input and Grounding Connections Stick Electrode Cable Connection Output CABLES, Connections and LimitationsWork Cable Connection Figure A.2 TIG Torch Connection Figure A.3 Auxiliary Power Connections Figure A.4 Robotic Interface Connection Product Description OperationPipe Thawing Welding Sparks Recommended Processes Recommended Processes and EquipmentProcess Limitations Equipment Limitations Figure B.1 Control Panel Controls and Settings Operation Display TIG Mode Menu Advanced Panel Controls Do not USE 4-STEP if Using AN Amptrol Remote Operation Stick Welding Features Internal SET UP ControlsTIG Welding Features Figure B.3 Figure B.4 Setup Guidelines for TIG Welding With AN Amptrol TIG Weld Cycle Chart Figure B.6 Gtaw Process Making a TIG Weld with AN AmptrolSmaw Process Factory Installed Options AccessoriesField Installed Options Optional Equipment Safety Precautions MaintenanceRoutine and Periodic Maintenance Overload Protection Component Access Service ProceduresSpark GAP Adjustment UNDER-COOLER Service HOW to USE Troubleshooting Guide Troubleshooting Course of Action SymptomsOutput Problems GAS Problems Meter Problems HI-FREQ Problems Preset & Output Control Problems TIG Welding Problems Stick Welding Problems TIG Problems Wiring Diagram Wiring Diagram Dimension Print K2622-1 Domestic Precaucion Aviso DE