3.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Make sure that Obtain an IP address automatically and Obtain DNS server address automatically are selected.

4.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

5.Restart the computer if asked.

6.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

7.Restart the computer if asked.

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

1.Click Start and Control Panel.

2.Click the Network and Internet Connections icon and then the Network Connections icon.

3.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

4.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP), and click the Properties button. Make sure that Obtain an IP address automatically and Obtain DNS server address automatically are selected.

B.Open a command prompt.

For Windows 98 and Millennium, click Start and Run. In the Open field, type command. Press the Enter key or click the OK button.

Appendix A: Troubleshooting

Broadband Router with 2 Phone Ports

53

Common Problems and Solutions

Page 61
Image 61
Linksys RTP300 manual For Windows XP