Broadband Router with 2 Phone Ports
The Front Panel
The Router’s LEDs, which inform you about network activities, are located on the front panel.
| Figure |
POWER | Blue/Red. The POWER LED lights up blue when the Router is powered on. If the blue LED is |
| flashing, the Router is booting up or upgrading its firmware. If the LED lights up red, then |
| disconnect the power, and wait five seconds. Then reconnect the power. |
ETHERNET | Blue. The ETHERNET LED lights up when there is an active connection through the |
| corresponding port. If the LED is flashing, then there is traffic moving through that port. |
PHONE | Blue. The PHONE LED is solidly lit when a telephone or fax machine has an active or |
| registered connection to your Internet phone service provider through the corresponding |
| port (PHONE 1 or 2). It flashes when the phone is being used or is off the hook. |
INTERNET | Blue. The INTERNET LED lights up when the Router is connected to your cable or DSL |
| modem. If the LED is flashing, the Router is sending or receiving data over the Internet port. |
| Proceed to “Chapter 4: Connecting the Router.” |
8 | Chapter 3: Getting to Know the Router |
| The Front Panel |
