Linksys wag300n (eu GettingtoKnowtheWireless-NADSL2+Gateway, Ports and Reset Button on Side Panel

Models: la) wag300n (eu

1 98
Download 98 pages 26.8 Kb
Page 12
Image 12
Chapter3:GettingtoKnowtheWireless-NADSL2+Gateway

Wireless-N ADSL2+ Gateway

Chapter3:GettingtoKnowtheWireless-NADSL2+Gateway

Ports and Reset Button on Side Panel

The Gateway’s ports and Reset button are located on a side panel.

Figure 3-1: Ports and Reset Button on Side Panel

DSL

The DSL port connects to the ADSL line.

Ethernet (1-4) The Ethernet ports connect to your computers and other network devices.

Reset Button There are two ways to reset the Gateway's factory defaults. Either press the Reset Button, for approximately five seconds, or restore the defaults from the Factory Defaults screen of the Administration tab in the Gateway’s Web-based Utility.

Power

The Power port is where you will connect the power adapter.

IMPORTANT: Resetting the Gateway to factory defaults will erase all of your settings (including Internet connection, wireless, and other settings) and replace them with the factory defaults. Do not reset the Gateway if you want to retain these settings.

Chapter 3: Getting to Know the Wireless-N ADSL2+ Gateway

6

Ports and Reset Button on Side Panel

Page 12
Image 12
Linksys wag300n (eu, la) manual GettingtoKnowtheWireless-NADSL2+Gateway, Ports and Reset Button on Side Panel