Linksys WET11 manual Setting Up the Wireless-B Ethernet Bridge, Overview, Setup Wizard

Wireless-B Ethernet Bridge

Chapter 5: Setting Up the Wireless-B Ethernet Bridge

Overview

Now that you’ve connected the Wireless-B Ethernet Bridge to your wired network, you are ready to set it up. The

Setup Wizard will guide you through all the necessary steps.

Setup Wizard

1.Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Utility should run automatically, and the screen in Figure 5-1 should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).

•Setup - Click the Setup button to proceed with the Setup Wizard.

•User Guide - Click the User Guide button to open the PDF file of this User Guide.

•LINKSYS Web - Click the LINKSYS Web button to access the Linksys website using an active Internet connection.

•Exit - Click the Exit button to exit the Setup Wizard.

2. Click the Setup button to begin the setup process. Figure 5-1: Welcome

3.Make sure the Bridge is correctly connected to your wired network (see Figure 5-2). Then click the Next button.

Figure 5-2: Check Connection

Chapter 5: Setting Up the Wireless-B Ethernet Bridge 9

Overview