Wireless-G Router for Mobile Broadband

The Administration Tab - Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. The reboot

Ping Test

Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then, click the Ping button. The Ping Test screen will then display the test results. To stop the test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen.

Traceroute Test

Traceroute Parameters. To test the performance of a connection, click the Traceroute button. Enter the address of the PC whose connection you wish to test and click the Traceroute button. The Traceroute screen will then display the test results. To stop the test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen.

Chapter 5: Configuring the Wireless-G Router for Mobile Broadband

Figure 5-42: Administration Tab - Diagnostics

Figure 5-43: The Ping Test

Figure 5-44: The Traceroute Test

43

The Administration Tab - Diagnostics

Page 50
Image 50
Linksys WRT54G3G-VN manual Administration Tab Diagnostics, Ping Test, Traceroute Test