![](/images/new-backgrounds/1266523/26652359x1.webp)
Wireless-G Router for Mobile Broadband
The Setup Tab - Mobile Network
On this screen, you can configure mobile network settings and view mobile broadband status information for the Router. Some of these settings will be automatically configured by the Router and, in most cases, should not be changed unless you are instructed to do so.
Mobile Network Connection Mode
Auto Connect. If you select Auto, the Router will automatically connect to the default mobile network when it powers on. The Router will disconnect from the mobile network after there is no traffic for 60 minutes. If you want to change this default, enter the number in the Maximum idle time before auto disconnect field. The Router will automatically reconnect to the mobile network when there is traffic. To manually connect to a mobile network, click Manual. You can use the Data Card button on the Router to connect and disconnect from the mobil network.
Mobile Network Status
Network Name. Displayed here is the name of the mobile network the Router is using.
Signal Strength. This indicates the strength of the mobile broadband signal that the Router is receiving.
Connection Time. This is the length of time the Router has been connected to the mobile network since your last connection.
Current Session Usage. Displayed here is the amount of data that has been sent to and received from the mobile network since your last connection.
Data Card Status
Card Model. Displayed here is the model number of your mobile broadband data card.
Card Firmware. This is the firmware version of your mobile broadband data card.
Phone Number. This is the phone number of your mobile broadband data card.
To update the screen with the latest status information, click the Refresh button.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes.
Chapter 5: Configuring the
Figure 5-12: Setup Tab - Mobile Network
23
The Setup Tab - Mobile Network