Linksys WUSB54GC manual Setting up and Connecting the USB Adapter, Starting the Setup Wizard

Compact Wireless-G USB Adapter

Chapter 4: Setting up and Connecting the USB Adapter

The USB Adapter is set up with the Setup Wizard that comes on the CD enclosed with the Adapter. This chapter will guide you through the setup procedure.

IMPORTANT: Do not connect the Adapter until you are instructed to do so or the setup will not work.

Starting the Setup Wizard

To begin the setup process, insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).

On the Welcome screen, you have the following choices:

Click Here to Start - Click the Click Here to Start button to begin the software installation process.

User Guide - Click the User Guide button to open this User Guide.

Exit - Click Exit to exit the Setup Wizard.

Figure 4-1: Setup Wizard’s Welcome Screen

1.To install the Adapter, click the Click Here to Start button on the Welcome screen.

2.After reading the License Agreement, click Next if you agree and want to continue the installation, or click Cancel to end the installation.

3.Windows will begin copying the files onto your PC.

Figure 4-2: Setup Wizard’s License Agreement

Chapter 4: Setting up and Connecting the USB Adapter 7

Starting the Setup Wizard