Compact Wireless-G USB Adapter

3.Press the Cisco logo or SecureEasySetup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional SecureEasySetup device.

NOTE: You can only add one SecureEasySetup device at a time.

4.When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your network.

Congratulations! Setup is complete.

To check the link information, search for available wireless networks, or make additional configuration

changes, refer to Chapter 5: Using the Wireless Network Monitor.

Chapter 4: Setting up and Connecting the USB Adapter

Figure 4-8: SecureEasySetup Complete

11

Setting Up the Adapter

Page 18
Image 18
Linksys WUSB54GC manual Changes, refer to Using the Wireless Network Monitor