Please read before proceeding
Service Manual
WARNING
Installer – Read all instructions, including this manual and the Armor Water Heater Installation and Operation Manual, before installing. Perform steps in the order given.
Have this water heater serviced/inspected by a qualified service technician at least annually.
Failure to comply with the above could result in severe personal injury, death or substantial property damage.
When calling or writing about the water heater – Please have the water heater model and serial number from the water heater rating plate.
Consider piping and installation when determining water heater location (see the Armor Water Heater Installation and Operation Manual).
Any claims for damage or shortage in shipment must be filed immediately against the transportation company by the consignee.
Handling ceramic fiber materials
REMOVAL OF COMBUSTION CHAMBER LINING
When servicing water heater –
• To avoid | electric | shock, | disconnect |
electrical | supply | before | performing |
WARNING
The combustion chamber insulation in this appliance contains ceramic fiber material. Ceramic fibers can be converted to cristobalite in very high temperature applications. The International Agency for Research on Cancer (IARC) has concluded, “Crystalline silica in the form of quartz or cristobalite from occupational sources is carcinogenic to humans (Group 1).” Normal operating temperatures in this appliance are below the level to convert ceramic fibers to cristobalite. Abnormal operating conditions would have to be created to convert the ceramic fibers in this appliance to cristobalite.
The ceramic fiber material used in this appliance is an irritant; when handling or replacing the ceramic materials it is advisable that the installer follow these safety guidelines.
¢Avoid breathing dust and contact with skin and eyes.
•Use NIOSH certified dust respirator (N95). This type of respirator is based on the OSHA requirements for cristobalite at the time this
document was written. Other types of respirators may be needed depending on the job site conditions. Current NIOSH recommendations can be found on the NIOSH website at http://www.cdc.gov/niosh/homepage.html. NIOSH approved respirators, manufacturers, and phone numbers are also listed on this website.
•Wear
¢Apply enough water to the combustion chamber lining to prevent airborne dust.
¢Remove the combustion chamber lining from the water heater and place it in a plastic bag for disposal.
¢Wash potentially contaminated clothes separately from other clothing. Rinse clothes washer thoroughly.
maintenance. |
|
|
| |
• To avoid | severe burns, allow | the water | ||
heater | to | cool | before | performing |
maintenance. |
|
|
| |
Water heater operation –
•Do not block flow of combustion or ventilation air to the water heater.
•Should overheating occur or gas supply fail to shut off, do not turn off or
disconnect electrical supply to
circulator. Instead, shut off the gas supply at a location external to the appliance.
•Do not use this water heater if any part
has been under water. The possible damage to a flooded appliance can be extensive and present numerous safety hazards. Any appliance that has been under water must be replaced.
NIOSH stated First Aid.
¢ | Eye: Irrigate immediately. |
| 3 |
| |||
¢ | Breathing: Fresh air. |
| |
|
|
