2 2Maintenance
Bi-Weekly Maintenance (or every 10 bags of pellets)
Clean the Heat Exchange Tubes
WARNING:
The front edge of the hopper lid becomes very hot, do not touch the area below the handle.
WARNING:
This rod becomes very hot during operation. Use the door latch tool or other device to move the cleaner.
With the stove cool (or using the door latch tool), move the heat exchange cleaner up and down several times.
Keep the door closed so the flyash does not enter the room.
Vacuum Hopper
Open the hopper lid.
Run the heater until the pellets run out. Open the hopper and vacuum out the entire hopper. The dust and any other debris near the bottom should be removed to prevent excessive
Cleaning the Optional Gold Surfaces (Door and optional Grill)
Fingerprints or other marks left on gold surfaces may become etched in place if they are not wiped clean prior to turning the stove on. Clean the gold with denatured alcohol and a soft cloth (make sure the heater is cool). Other cleaners may leave a film that may become etched into the gold.
Travis Industries | 4 0 5 1 2 1 6 | 9 3 5 0 8 0 5 1 |
