SECTION 4
Recording Set
Global Parameters
Settings for General Parameters.
Recording Set
Global Parameter |
| Audio 1 Rec: | OFF |
| |||
|
| Audio 2 Rec: | OFF |
|
| Audio 3 Rec: | OFF |
|
| Audio 4 Rec: | OFF |
|
| Repeat Rec: | ON |
|
| Watermark Emb ON | |
|
| Rec Res | 720 x 240 |
|
| Save & Exit |
|
|
|
|
|
1.AUDIO # REC: Turns Audio recording ON/OFF. press the K and L buttons to highlight, and press the ←→ buttons to change to ON/OFF. 4CH model does not have extended menu as above.
2.REPEAT RECORDING: Allows the DVR unit to repeat recording. To change the setting, press the K and L buttons to highlight, and press the ←→ buttons to change to ON/OFF.
3.WATERMARK EMBEDDING: Adds Watermarking to the recorded event. Press the K and L buttons to highlight, and press the ←→ buttons to change to ON/OFF.
4.RECORDING RESOLUTION: Sets the Recording Resolution for events. To change the Resolution, press the K and L buttons to highlight, and press the ←→ buttons to change to either 720x240 or 360x240.
5.SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the K and L buttons to highlight, and press the SEL button to accept the changes.
Normal Recording
Controls the settings for Manual Recording.
Normal Recording
1.CH1~4 FRAMERATE: Set the number of Frames Per Second. Press the K and L buttons to highlight, and press the ←→ buttons to set the FPS between 0~15 Seconds.
2.QUALITY: Set the quality level for the recording to High, Mid or Low
CH1 Frame Rate: | 15 FPS |
CH2 Frame Rate: | 15 FPS |
CH3 Frame Rate: | 15 FPS |
CH4 Frame Rate: | 15 FPS |
CH1 Recording Quality | HIGH |
CH1 Recording Quality | HIGH |
CH1 Recording Quality | MED |
CH1 Recording Quality | LOW |
Save & Exit |
|
3.SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the K and L buttons to highlight, and press the SEL button to accept the changes.
Revision 1.0 | 29 |
