Recording Set

SECTION 4

Motion Recording

Setup and configurations for Motion Sensor events.

CH1 Frame Rate:

15 FPS

 

 

CH2 Frame Rate:

15 FPS

 

 

CH3 Frame Rate:

15 FPS

 

 

CH4 Frame Rate:

15 FPS

 

 

CH1 Recording Quality

HIGH

 

 

CH1 Recording Quality

HIGH

 

 

CH1 Recording Quality

MED

 

 

CH1 Recording Quality

LOW

 

 

Post Alarm Duration

150 SEC

 

 

Setup Motion

 

 

 

 

Save & Exit

 

 

 

 

 

 

 

 

Post Motion(5~240sec) 150 SEC

Set CH1 Motion Area

 

 

 

Set CH1 Motion Area

 

 

Set CH1 Motion Area

 

 

Set CH1 Motion Area

 

 

CH1 Motion Sensitivity:

HIGH

 

CH1 Motion Sensitivity:

HIGH

 

CH1 Motion Sensitivity:

MED

 

CH1 Motion Sensitivity:

LOW

 

Save & Exit

 

 

1.CH1-CH4 FRAMERATE: Set the number of Frames Per Second. Press the K and L buttons to highlight, and press the SEL button to select, and use the I and J and SEL buttons to change the settings.

2.QUALITY - Set the quality level for the recording to High, Mid or Low

3.POST MOTION DURATION: Set the duration that the DVR will record once motion is detected: 5, 30, 60, 90, 120, 150, 180, 210 or 240 seconds.

4.SETUP MOTION: Configuration for each Motion Sensor enabled Camera Press the K and L

buttons to highlight the Setup Motion option, and press the SEL button to access the SETUP MOTION submenu. Press the K and L buttons to highlight a specific Camera, and press the SEL button to select.

POST MOTION: Set the length of time to continue recording after motion has stopped.

AREA: Press the SEL button on the AREA option to specify segments of the Camera view to have Motion Detection. Use the KLIJ buttons to navigate around the Motion Setup screen, and press the SEL button to turn a segment ON/OFF. Press the MENU button once complete. Dark Blue indicates that a section has been selected for motion detection, and blank areas indicate that motion will not be detected in those areas.

SENSE: Sets the Sensitivity of the Motion Detection: Use the I and J and SEL buttons to change the setting to High, Mid, Low or Off.

5.SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the K and L buttons to highlight, and press the SEL button to accept the changes.

30

INSTALLERS MANUAL Copyright 2006 Digimerge Technologies Inc.

Page 30
Image 30
LOREX Technology DHU500 SERIES installation manual Motion Recording