134
Configuring the system remotely
Display menu
To configure channel display settings:
1Click the REMOTE CONFIG tab.
2Configure the following:
• Channel: Select the channel that you want to apply the settings to.
• Channel Name: Enter the desired channel name.
• Position: Select the position of where the text appears in the channel.
• U-L: Upper left hand corner
• D-L: Lower right hand corner
• U-R: Upper right hand corner
• D-R Lower right hand corner
• Covert: Select Enable to blank out the channel locally on the DVR. Note that the system will
continue to record despite being in Covert mode.
• Display Record Time: Show or hide the channel recording time.
3In the selection boxes, select the channels that you wish to apply the settings to.
4Click Save to apply your settings.
Remote Config tab