143
Configuring the system remotely
2Configure the following:
• Channel: Select the channel you wish to configure motion detection.
• Motion Detect: Select Enable or Disable.
• Sensitivity: Select the desired sensitivity. The greater the number, the greater the motion
detection sensitivity.
• Type: Select Set to allow the cursor to mark the grid as a motion detection zone.
• Click the Copy button to copy the setting to multiple channels. Next, click on the channels
that you wish to apply the settings to.
3Drag the cursor over the motion grid to select the area that will detect motion.
4Click Save to apply your settings.
System Menu
To configure the System setting menu:
1Click REMOTE CONFIG>System>System Setting.
2Configure the following:
• Timezone: Select the DVR’s local time zone.
3Click Save to apply your settings.
Drag your mouse cursor to mark
areas to detect motion.
System Setting