145
Configuring the system remotely
4Select the checkboxes to enable the menus the user will have access to.
5Click Save to apply your settings.
To change the Admin Password:
1Click REMOTE Config>System>User.
2Select admin in the user list.
3In the Pws Enable drop-down menu, select Enable.
4In the Password and Confirm fields, enter the new password.
5Click Save apply the settings.
DST Menu
To configure the DST (daylight saving time) menu:
1Click REMOTE Config>System>DST.
2Configure the following:
• DST: Select Enable or Disable to enable or disable DST on the system.
• Time Offset: Enter the number of hours DST should offset.
• DST Mode: Select the desired DST mode.
• Start Time: Select when DST begins.
• End Time: Select when DST ends.
3Click Save to apply your changes.
Select the menus that the users will
have access to