52
Using the Main Menu
Loading System Defaults
Loading the system defaults restores
the system’s configuration to the
factory settings.
To load system defaults:
1From the Advance Menu, click System.
2Click Load Default.
3Select the menus that you wish to restore
to default settings.
4Click Apply.
5When the warning window appears, click
OK to restore your settings.
6Click OK when the confirmation window
appears.
7Click Apply to save your settings.
Upgrading The System Firmware
The latest firmware version can be
found at www.lorextechnology.com.
Navigate to the appropriate product
page, and locate your system’s
firmware.
Firmware updates improve system
reliability, and may include new
features for the system.
NOTE: Upgrading the firmware
restores the system to factory
default settings.
To upgrade the system firmware:
1Download and extract the firmware into a
blank USB flash drive. The firmware
should be in a folder named dvrupgrade.
Ensure that this is the only folder in the
USB drive.
2Insert the flash drive into the rear panel of
your system. Ensure the USB flash drive is
plugged into the appropriate USB port, and
not the USB mouse port.
3Right-click and from the sub-menu click
Main Menu>Advance>System.
4Click Firmware Update.
5Follow the on-screen instructions to
update the firmware. Do not remove the
USB flash drive during the firmware
update. Wait for the system to reboot.
Firmware Update