13
Remote Control (4 & 8 Channel)
Remote Control (4 & 8 Channel)
The remote control is the secondary input
device for navigating the system’s interface.
To use the remote control:
1Number Keys (1 -9): Selects the desired
channel in full screen mode
• 0: Press 0 three times to switch between VGA
output and BNC Video Out output.
• : Changes view of system channel (i.e.
Channels 1-4, 5-8, split-screen etc.)
• MENU: Opens the Main Menu. Within menus,
the MENU button is used to exit the menu.
2Navigation Cursors: Use the navigation
cursors to navigate the menu.
• : Confirms the selection in the menu.
• Press to acc ess Sys tem In for mat io n
during live view.
3SUB MENU: Opens the system sub menu.
4MUTE: Mutes audio channel during live view
and playback.
5Playback Controls:
• : During playback, press repeatedly to
increase playback speed
• : During playback, press repeatedly to
increase reverse playback speed
• :
• In live view, press to open the Record
Search Menu
• During playback, press to play video.
• :
• In live view, press to start sequence
view. During playback, press to pause
video
• : Record: P ress to resu me recordin g
• : Press to stop recording.
1
2
34
5
*Audio capable cameras (not included) are required for audio
recording and l isten-in audio fu nctiona lity.
TIP: When using the remote
control to enter password and
camera titles, select the field
using the navigation buttons,
press , and then press the
number buttons.
.
.