Bracket Mount
An alternative to flush mounting the HDS display is to bracket mount the unit. This method has the advantage that the display can be easily removed when not in use and may be tilted to achieve the best possible viewing angle.
1:Loosely screw securing knobs to the
Display unit.
2:Temporarily mount the display unit in the bracket
3:Make sure the display can be adjusted to the correct angle without interfering with the surrounding. Allow space for cables attached to the rear of the unit
4:Remove the display unit and use the mounting bracket as a template to mark the four positions of the screw holes and optional center cable hole.
5:Drill a pilot hole for the four screws and an optional hole large enough for the cables to emerge from.
6:Secure the bracket to the surface
7:Connect the cables.
12