Assembling the Transducer bracket
After determining the correct position for the ratchets, loosely assemble the transducer and bracket assembly as shown in one of the two diagrams below.
One-piece bracket assembly
Metal washer
Lock nut
Rubber washers 
Ratchets
Metal washer
Bolt
Note: Do not tighten the transducer bracket assembly until you have aligned the transducer and bracket on the transom.
Two-piece bracket assembly
Ratchets | Large flat |
| washer |
Bolt
Lock nut
Small flat
washerThick rubber washer
Note: Do not tighten the transducer bracket assembly until you have aligned the transducer and bracket on the transom.
18