Tip: If you are in the NAV big number screen, just turn the Channel Select knob to immedi- ately access the Waypoint List. Select the new waypoint and press ENT.
3-1-4 Go to Nearest Waypoint (NEAREST WP)
| MENU SELECT |
|
|
| WAYPOINT |
|
|
| NEAREST | WP |
|
| WAYPOINT |
|
|
| WP LIST |
|
|
| R01W04 001 |
| |
| BACKLIGHT |
|
|
| NEAREST WP |
|
|
|
| 98 |
|
| BUDDY LIST |
|
|
| TEMP |
|
|
| R01W01 | 003 |
|
|
|
|
|
|
|
|
|
|
| 136 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: A valid GPS signal must be received to see this selection.
1.Select WAYPOINT then NEAREST WP.
2.Press ENT to display the nearest waypoint with distance and bearing from your current position.
Other waypoints are listed in increasing distance from your current position.
3.Press ENT to set the nearest waypoint as the active waypoint OR move the cursor to another waypoint and then press ENT.
The chosen waypoint is shown on the bottom line of the LCD.
3-1-5 Go to Temporary Waypoint
| MENU SELECT |
|
|
| WAYPOINT |
|
|
| TEMP |
|
|
| TEMP1 |
|
| WAYPOINT |
|
|
| WP LIST |
|
|
| TEMP1 |
|
|
| GO |
|
| BACKLIGHT |
|
|
| NEAREST WP |
|
|
| TEMP2 |
|
|
| TEMP EDIT |
|
| BUDDY LIST |
|
|
| TEMP |
|
|
|
|
|
|
| DELETE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Select WAYPOINT then TEMP.
2.Your temporary waypoint list is displayed. There are 3 choices for quick access.
3.Select the temporary waypoint to go to. Press ENT.
4.Press ENT to set the temporary waypoint as the destination waypoint. It is immediately shown on the bottom line of the LCD.
Tip: Hold down MOB and release before the 3 second countdown completes. Your current LL position is stored in TEMP1 to TEMP3 in the waypoint list. If the list is full, a message appears asking if the oldest location can be overwritten:
TEMP WP FULL
DELETE TEMP1?
YES
NO
22 | Lowrance - |
