Lowrance electronic LVR-880 EU, LVR-880 US manual Send Waypoint Data to a Chartplotter

3-1-6 Send Waypoint Data to a Chartplotter

You can send waypoint data over NMEA2000 to a compatible chartplotter.

MENU SELECT	WAYPOINT	WP LIST	TEMP2
WAYPOINT	WP LIST	NEW WP TEMP2	WPT
BACKLIGHT	NEAREST WP	MOB	DELETE
BUDDY LIST	TEMP	TEMP1	TX WPT DATA

1.Select WAYPOINT then WP LIST. Your waypoint list is displayed. Press ENT. NEW WP starts to flash.

2.Scroll down to the waypoint whose data you want to send to the chartplotter then press ENT. In the example scroll to TEMP2 then press ENT.

3.Scroll down and select TX WPT DATA and press ENT to send the data.

3-1-7 Edit or Delete a Temporary Waypoint

MENU SELECT		WAYPOINT	TEMP	TEMP2
WAYPOINT		WP LIST	TEMP1	GO
BACKLIGHT		NEAREST WP	TEMP2	TEMP EDIT
BUDDY LIST		TEMP		DELETE
TEMP EDIT		SAVE
TEMP2		NEW WP1
18 46.243 N		YES
		NO
160 125.341	E

1.Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.

2.Select the temporary waypoint to edit then select TEMP EDIT.

Note: To delete the temporary waypoint, select DELETE then YES. The temporary waypoint is deleted immediately and the temporary waypoint list is displayed again.

3.The waypoint details are displayed. The cursor is at the first character of the name.

4.Edit the temporary waypoint name OR to edit only the latitude or longitude, press ENT repeatedly until the cursor moves to the required line.

5.When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.

6.Press ENT to store the changes. The waypoint list is displayed again. If more changes are required, repeat steps 2 through 6. Otherwise, press EXIT.

Lowrance - LVR-880 Operation Instructions 23