Lowrance electronic LVR-880 EU Select the GPS Source GPS Source, Select the FM Region FM Region

2.Select the desired setting then press ENT.

CHECK SUM ON (on) is the usual setting. The COM PORT uses 4800 baud rate and can receive the following GPS data sentences: RMC, GGA, GLL, GNS. Additionally, the radio will output the following NMEA DSC data: DSC (for DSC call), DSE (for enhanced position).

4-10 Select the GPS Source (GPS SOURCE)

This radio can use either NMEA0183 or NMEA2000 protocol to receive GPS data from a compatible GPS unit.

Note: NMEA2000 SOURCE options will appear (up to 4 sources showing the actual source name) only if NMEA2000 is operational.

RADIO SETUP	GPS SOURCE
INT SPEAKER	NMEA0183
COM PORT	LGC3000
GPS SOURCE	LCX113CHD

1.Select RADIO SETUP then GPS SOURCE. (If there is only one NMEA protocol available on your vessel, only that will be shown.)

2.Select the desired NMEA source then press ENT.

4-11 Select the FM Region (FM REGION)

RADIO SETUP	FM REGION	FM REGION
COM PORT	USA	AUS/NZ
GPS SOURCE	EUROPE	JAPAN
FM REGION	AUS/NZ	OTHERS

1.Select RADIO SETUP then FM REGION.

2.Select the FM region and press ENT. If you selected USA, EUROPE, AUS/NZ, or JAPAN, the FM REGION selection is now complete.

If you selected OTHERS, you must also specify the channel spacing, upper frequency, and lower frequency.

FM REGION	OTHERS	CH SPACING
AUS/NZ	CH SPACING	200KHz
JAPAN	UPPER FREQ	100KHz
OTHERS	LOWER FREQ	50KHz

1.Select CH SPACING then select the channel spacing.

2.Select UPPER FREQ then select the upper frequency (between 108.00 and 106.00 MHz).

3.Select LOWER FREQ then select the lower frequency (between 87.50 and 89.50 MHz).

Lowrance - LVR-880 Operation Instructions 39