LSI40909G-S PCI to Fibre Channel Host Adapter for Sun Solaris 3-1
Chapter 3Software Installation
This chapter describes the features and use of the LSI Logic/IntraServer
device drivers for the Solaris operating system 2.6, 2.7, and 2.8. This
chapter includes these topics:
•Section 3.1, “Installing the Sun SPARCSolar is Fusion-MPT™
Drivers,”page 3-1
•Section 3.2, “Installing the itmpt Sun SPARCSolar is FC Driver,”
page 3-7
•Section 3.3, “Troubleshooting,”page 3-15
For the most up-to-date information on drivers, please visit:
http://www.intraserver.com/support/drivers.html

3.1 Installing the Sun SPARC Solaris Fusion-MPT™ Drivers

The LSI Logic LSI40909G-S offers the highest possible performance on
Sun Solaris systems. The LSI Logic Fusion-MPT FC driver (itmpt) is
optimized for lowCPU overhead and high I/O throughput, making use of
the LSI Logic Fusion-MPT architecture.
The LSI Logic FC adapters have built-in Fcode, designed to operate in
the Sun OpenBoot environment, allowing FC devices to be availableto
the OpenBoot (ok) prompt.
The LSI Logic driver, itmpt, allows the Solaris operating system to
interface with FC devices connected to the LSI40909G-S. This driver
takes advantage of new hardware features in the LSI40909G-S to
minimize CPU utilization, including interrupt coalescing, which can result
in less than one interrupt per I/O.