3-8 Software Installation
3.2.1.1 Floppy Disk Install
If you received the drivers on a floppy diskette,follow these steps:
Step 1. Place the diskette in the floppydr iveand execute the volcheck
command to ensure the system sees the floppy.
Step 2. Change the director y to the root of the floppy
(e.g. "cd /floppy/floppy0").
Step 3. Execute the pkgadd procedure to add the itmpt driver to the
operating system.
Example: pkgadd(
space
)-d(
space
).
Youwill see the display on the screen as shown in Figure 3.5 through
Figure 3.7.