2.2.2 Inserting the Host Adapter

For safe and proper installation, check the user’s manual supplied with your computer and perform the following steps.

Step 1. Ground yourself before handling this host adapter board. Remove the LSI8751D from the packing and check that it is not damaged. Figure 2.1 shows an example of this board.

Figure 2.1 Hardware Connections for the LSI8751D

Plug-in HVD Terminator

(Fits J2 or J3)

LED

Connector

J4

68-Pin High Density

SCSI Interface

J2

68-Pin External

SCSI Interface

J3

J1 to PCI

Bus Connector

on Mainboard

Step 2. Switch off and unplug power cords for all components in your system.

Step 3. Remove the cabinet cover on your computer to access the PCI slots.

Caution: Ground yourself by touching a metal surface before removing the cabinet cover. Static charges on your body can damage electronic components. Handle plug-in boards

Detailed Installation Procedure

2-3