2.2.3.2 Making External SCSI Bus Connections

This section provides step-by-step instructions for making external SCSI bus connections:

Step 1. To connect external SCSI devices to the LSI8751D, plug the 68- pin connector on one end of a shielded external SCSI cable (see Figure 2.3) into the host adapter connector J3 (see Figure 2.1).

This connector is now bracketed to the back panel of your computer. Figure 2.9 shows how this connection is made.

Figure 2.9 External Cable to Host Adapter

Detailed Installation Procedure

2-11