2.2.4.2 External SCSI Connections

If you make only external SCSI device connections to the host adapter, you must terminate the last external device on the SCSI bus. You must disable the termination on all other devices. Termination on the host adapter is required in this case. Insert the plug-in HVD terminator into the internal connector J2 on the host adapter.

Figure 2.13 shows you how to enable or disable termination for this SCSI bus configuration.

Figure 2.13 External SCSI Device Termination

Last Device

on Chain –

Termination

Enabled

Does Not

End Chain –

Termination

Disabled

Last Device on Chain – Host Adapter Plug-in

HVD Terminator Required on Internal Connector J2

2-16

Installing the LSI8751D