2.2.4.1 Internal SCSI Connections

If you make only internal SCSI device connections to the host adapter, you must terminate the last internal device on the SCSI bus. You must disable the termination on all other devices. Termination on the host adapter is required in this case. Insert the plug-in HVD terminator into the external connector J3 on the host adapter.

Figure 2.12 shows an example of how termination is determined for this SCSI bus configuration.

Figure 2.12 Internal SCSI Device Termination

Last Device

on Chain –

Termination

Enabled

Does Not

End Chain –

Termination

Disabled

Last Device on Chain –

Host Adapter Plug-in

HVD Terminator

Required on External

Connector J3

Detailed Installation Procedure

2-15