Lyngdorf Audio RP-1 instruction

16.Volume Up/down No function.

17.Up / Down / Left / Right

In normal operation mode the Up/Down toggles between Bypass, Focus and Global ﬁlter and the Left/ Right toggles between Neutral and the available voicings.

In menu mode they are used for navigation in the menu system. Pressing and holding down the Up/ Down, Right/Left keys, changes some selected values fast.

18. Enter

Turns the RP-1 On from stand-by mode and works as Enter in menu system.

19. No Function.

Page 11

Image 11

Contents

RP-1 RoomPerfect Page Table of Contents Serial Number Registration Operating VoltageUnpacking the RP-1 Introduction Remote control Accessories Controls Front Panel Rear Panel Display IndicatorsPage Remote Control Page Connecting to sources and ampliﬁers Connecting the RP-1 Integrated amp / Preamp-poweramp RP-1 Setup options of Main and Line outputs Navigating the Menu System Menu System Menu Tree Voicing Introduction to RoomPerfectGlobal Listening Focus Listening RoomPerfect Guided Setup Setting the Measurement Volume Level Room Measurements Focus Measurement Adding more Room Measurements Calculation of Focus and Global Filters Measure Room Pos Advanced OptionsChange Focus Position RoomCorrection RoomKnowledge Display Brightness Display TimeoutDisplay Input Connection Comm Address Advanced SetupInput Sensitivity Communication Routing Line Out Level Filter Type Crossover Frequency Remote Control Delay Firmware Versions Factory Reset RoomPerfect Troubleshooting RP-1 Firmware Upgrading Balanced Inputs ConnectorsCleaning and Maintenance Mains Connector Mains Technical SpeciﬁcationsAudio Protection Technical Assistance Voicing Curves AppendixPage

Lyngdorf Audio RP-1 owner manual

Models: RP-1