Connecting the RP-1
The photos used are only meant as visual aids to show the versatility of the RP-1, Lyngdorf Audio doesn’t necessarily carry all other products with the described speci- fications in the product assortment.
Connecting to sources and amplifiers
The RP-1 is very simple to hook up. There are three basic ways to connect the RP-1 to your system.
1.Connect all sources to your preamplifier and connect it to the RP-1 input. Then connect the RP-1 output signal to a poweramplifier.
Source(s)
DPA-1Digital Pre-Amplifier
Preamp
RP-1
Poweramp
2.Connect a single audio source to the RP-1 input.
Then connect the RP-1 output signal to your integrated- or preamplifier.
Source
RP-1
DPA-1Digital Pre-Amplifier
Integrated amplifier / Preamp
