dmc1
Connect each yellow wire to a note selection terminal. (Do not connect more than one yellow wire per note terminal.)
Plug in the modular chime plug to the 4 pin connector labeled as CHIME on the dmc1 master unit as shown in figure 10.
Figure 10 - dmc1 connections
Antenna Connection
Connect the FM dipole twin lead antenna to the FM 300 Ohm terminals on the dmc1 master as shown in figure 10. Connect the orange AM antenna wire to the AM terminal on the master.
Wireless Remote Control Connection
To install the optional wireless remote control receiver module MCRC, attach the MCRC module using the Velcro strips provided to the wall housing as shown in figure 10. Place the white antenna lead through the hole provided in the wall housing into the wall cavity. Failure to do so
www.mssystems.com 800.421.1587
Page 10
