M&S Systems dmc1 manual Audio components connected via a line level input

dmc1

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

•Finish out the dmc1 system after the application of wall covering material.

•Do not power up the dmc1 master until all remote stations and speakers are connected.

•Do not connect a CAT-5 wire if you are unsure of it terminating point. Connecting a door speaker to a room station may result in system damage.

•Do ensure that all rough-in instructions have been followed before power is applied to the dmc1 system.

•Do not splice cables. Splices are unreliable and defeat the signal isolation properties of the cable.

•Do not attach devices unauthorized for use with this system. Authorized devices include:

•Audio components connected via a line level input

•DMC1CD 6-disc player

•If extra cables have been run for future speaker additions, care must be taken to ensure these cables are not connected to the dmc1 master unit. Un-terminated cables (no station) connected to the dmc1 master may cause electronic feedback that will damage the master unit.

www.mssystems.com 800.421.1587

Page 4