External Music Source - AWP
Use the labels provided to mark respective cables. Connect the cables to the plate as shown in figure 5 and mount the plate using the two
screws provided.to dmc1
Figure 5 - External source wiring
www.mssystems.com 800.421.1587 Page 7
Figure 4 - Volume control wiring
dmc1
Satellite Volume Control MVC1 Series
At each MVC1 location strip approximately 4 inches of jacket from wires and separate colored
conductors from each other. Connect drain wires together from both cables using a wire nut. Wire nut each colored conductor to its respective wire as shown in figure 4. Connect blue and violet wires to the corresponding terminals of the satellite speakers. Mount the MVC1 to the single gang box using the two screws provided with the volume control.
