M-Audio 61 manual Routing Midi Signals to your Software, Routing Midi Signals from your Software

ProKeys Sono 61 User Guide 28

Routing MIDI Signals to your Software

Most recording applications require you to select the MIDI input device that you wish to use.. To do this, navigate to the appropriate MIDI setup menu within your music software and select “ProKeys Sono” 10 as the MIDI input device.. The exact name and location of the MIDI setup menu varies among different sequencing applications but it is often found under the “setup” or “preferences” menu.. See your specific application’s documentation to learn more about MIDI input configuration..

10Note that the actual ProKeys Sono name displayed by the computer may vary slightly.

Attention Windows Users: Under Windows XP, ProKeys Sono will appear as “USB Audio Device” if the optional drivers have not been installed, and “ProKeys Sono 61” if the optional drivers have been installed. In Windows Vista,

ProKeys Sono will appear as “ProKeys Sono 61” regardless of whether or not the optional drivers have been installed.

Once ProKeys Sono is selected as the MIDI input device, most applications will automatically route MIDI data from ProKeys Sono to the record-enabled track (unless you explicitly specify a different routing). This means, you can record-enable your preferred MIDI track, start recording in your sequencer, and play your ProKeys Sono keyboard. Your performance will be recorded by the application. Refer to your sequencing application’s documentation to learn more about the specifics of recording MIDI within that program.

Routing MIDI Signals from your Software

Your ProKeys Sono will appear as two separate MIDI output ports in your sequencing application.. Selecting “ProKeys Sono Voices” will send your MIDI data to the ProKeys Sono internal sound engine whereas selecting “ProKeys Sono MIDI Out” will send that MIDI data to the MIDI output jack on the rear of the keyboard..11

Sending MIDI to the ProKeys Sono sound engine

ProKeys Sono contains a complete GM sound set containing 128 voices, five of which are the ProKeys Sono premium-quality voices.. Select:

•“ProKeys Sono 61” or “USB audio device” as the MIDI output hardware device within your recording software’s MIDI setup options..

•“ProKeys Sono Voices” or “USB audio device” as the MIDI output port of the specific MIDI track you’re using within your recording software..

This configuration allows you to route MIDI data from your computer to the premium voices and GM sounds on

ProKeys Sono.. Consult your software’s documentation for instructions on how to configure the software for use with MIDI instruments that contain built-in sounds (such as ProKeys Sono)..

NOTE: Connect headphones or powered speakers to the ProKeys Sono main outputs. Sounds created by ProKeys Sono and from software used with it will be available at the main outputs on ProKeys Sono (not on the outputs of your computer’s built-in soundcard).

Sending MIDI to an external MIDI device connected to ProKeys Sono

If you would like to send MIDI data to an external MIDI device connected to ProKeys Sono: Select:

•“ProKeys Sono 61” or “USB audio device” as the MIDI output hardware device within your recording software’s MIDI setup options..

•“ProKeys Sono MIDI Out” or “USB audio device [2]” as the MIDI output port of the specific MIDI track you’re using within your recording software..

11IMPORTANT: If you are sending data to the “ProKeys Sono MIDI Out” port, the

ProKeys Sono Edit Mode function “MIDI Out” must be configured to allow your sequencer’s MIDI data to be sent out of the MIDI output jack. By default, the MIDI output jack on the rear of the keyboard only receives data generated by playing the ProKeys Sono keyboard directly, and does not receive MIDI data coming from your computer’s sequencing application via USB.

The operation of MIDI Out mode can be toggled by following the instructions found in the “MIDI Out Mode Key” portion of the “Advanced ProKeys Sono Functions in Edit Mode” chapter of this User Guide.