Powering ProKeys Sono:
ProKeys Sono can be powered through either the USB port or the DC Power Supply port.. It is NOT necessary to power the device through both ports.. For example, if ProKeys Sono is connected to your computer using the USB cable, it is not necessary to use a DC power supply..

ProKeys Sono 61 User Guide

8

Rear Panel Descriptions:

£Ç £n £™ Óä Ó£ ÓÓ ÓÎ Ó{ Óx ÓÈ

17.1/4” Main Outputs (Output R—L/Mono):Connect these unbalanced tip-sleeve (TS) main outputs to your mixer, powered speakers, or amplifier.. These jacks output a mixed signal consisting of the ProKeys Sono internal piano sounds, signal from all of the keyboard’s inputs (mic, instrument, and auxiliary), and audio signal coming from your computer.. If you are connecting to a mono (single channel) device or amplifier, use the left 1/4” output..

18..Auxiliary RCA Inputs (Aux Input R—L): These line-levelRCA-type inputs can receive signal from a variety of sources such as mixers, CD players, or drum machines.. These inputs are mixed into the outputs of ProKeys Sono and will be heard on the 1/4” main outputs (17) or headphone outputs (2)..

19..1/4” Instrument Input (Instrument): This unbalanced tip-sleeve (TS) connector allows you to connect an instrument, such as an electric guitar or bass.. Use the Instrument Gain knob (8) to control the gain level of this input..

20..XLR Microphone Input (Microphone): This input accepts a dynamic microphone connected via a standard three-pin balanced XLR cable.. Use the Microphone Gain knob (7) to control the gain level of this input..

TIP: The ProKeys Sono Auxiliary inputs do not have an input gain knob. Therefore, the volume of these inputs must be adjusted at the source to ensure that the incoming signal does not clip (distort) at the ProKeys Sono input. For example, if you have connected a CD player to the RCA inputs, you may need to adjust the output volume of the player itself to ensure distortion free recordings.

21..Sustain Pedal Jack (Sustain): Connect an optional sustain pedal to this jack..

This pedal is normally used for sustaining the sound you are playing without having to keep your hands on the keyboard (just like the sustain pedal on a piano)..

22..MIDI Out Jack (MIDI Out): ProKeys Sono can connect to external MIDI devices such as synthesizers or sound modules through this jack.. By default, MIDI data generated by playing the keys on the keyboard is sent to this MIDI output jack.. However, it is possible to configure ProKeys Sono to act as a USB to MIDI interface, allowing MIDI data from your computer to be sent out of this jack.. See the “MIDI Out Mode Key” section of the “Advanced ProKeys Sono Functions in Edit Mode” chapter for more information..

23..USB Port ( ): Use the provided USB cable to connect ProKeys Sono to an available USB port on a PC or Macintosh computer.. This USB connection will power ProKeys Sono and allow transfer of audio and MIDI data between your computer and the device.. Alternatively, an optional USB-type power supply can be

connected to this port for standalone operation..

24.. DC Power Supply Port (9V DC): Connect an optional 9V DC >500mA center-positive power supply to this jack when using ProKeys Sono in standalone mode.. This port does not need to be used when ProKeys Sono is connected to your computer with a USB cable or if a USB-type power supply is being used..

25.. On/Off Switch ( I / O ): This On/Off switch turns ProKeys Sono on and off..

26.. Kensington® Security Slot ( ): This slot is compatible with Kensington® security cables to protect your device from theft..

Page 9
Image 9
M-Audio 61 manual Rear Panel Descriptions, £Ç £n £™ Óä Ó£ ÓÓ ÓÎ Ó Óx ÓÈ