Other Controls
Directional Buttons
The Directional buttons can be used to control certain supported software features. Press the HyperControl button next to the Directional buttons to enable this function.
Trigger Pads
The trigger pads can be used to trigger drum or instrument sounds mapped by your software, but they have additional functions in HyperControl Mode (depending on your software's specific implementation of HyperControl). Press the HyperControl button next to the trigger pads to enable this function.
Identifying Control Assignments
Whether you're in HyperControl Mode or using your own control assignments, it can be helpful to see which hardware control is assigned to which software parameter.
To check the control assignment of a hardware control:
1.Press and hold the Identify button, or
2.Manipulate the control you want to identify. The assigned parameter and its current setting will appear on the LCD.
3.To go back to normal operation, release the Identify button or, if you latched it, press it once again.
Controlling Ignite
Ignite, included with your Axiom AIR, is a creative tool designed for rapid and fluid capture, refinement, and sharing of musical ideas. You can use it on its own or as a counterpart to your favorite DAW.
To download Ignite, visit airmusictech.com/download_ignite.
For more
Axiom AIR keyboards come
Transport Controls
Press the HyperControl Mix Mode button (
button) on the main control panel, and then use the transport buttons to control those transport functions in Ignite.
Navigation
Use the Directional buttons to navigate through Ignite's tabs and
Instruments
Refer to your Ignite's HyperControl user guide (at
12
