Torq 1.5 User Guide Chapter 1 84Torq 1.5 User Guide Chapter 15 84Mixer Mode
This option allows you to switch between I nternal and External Mixer mode.
Internal Mixer mode: This is the def ault setting where Torq’s on-screen mixer is used to blend the signa ls from
the Decks.
External Mixer mode: This will bypas s the Torq mixer and route each Deck to its own output pair on your audio
interface. These individual s tereo outputs can then be connected t o your favorite DJ mixer in the same manner as
two turntables or CDJ’s. You’ll then mix and cue your track s using your DJ mixer instead of Torq’s Mixer.
< Channel Assignments
Once you have selected an audio interface and selected a m ixer mode, you can assign the outputs of Torq to the
channels of the selected audio inter face. The assignment options will d iffer depending on which mixer mode is
active:
» Internal Mixer
• Master Output — Click to access the dro p-down menu and select the stereo out put pair for the
Torq Master Output. This is the output you wil l connect to the speakers.
• Cue Output — Click to access the drop-down m enu and select the stereo output pair for cue ing
(or pre-listening) to the output of a Dec k. This is the output for the headphones .
• Line Input A — Click to access the drop-down menu an d select the stereo input pair for use as
the Line Input for Channel A of the Mixer.
• Line Input B — Click to access the drop-down menu an d select the stereo input pair for use as
the Line Input for Channel B of the Mixer.
• Control Input A — Click to access the drop-down m enu and select the stereo input to which
your left turntable or CD player is connec ted. This is also the Control Input used by AMP utate
mode.
• Control Input B — Click to access the drop-down m enu and select the stereo input to which
your right turntable or CD player is connect ed.
» External Mixer
• Deck A Output — Click to access the drop-d own menu and select the stereo output for Dec k A.
This signal will not be processed by Torq’s Mixer—it will be fed int o a stereo channel of an external
DJ mixer.
• Deck B Output — Click to access the drop-d own menu and select the stereo output for Dec k B.
This signal will not be processed by Torq’s Mixer—it will be fed int o a stereo channel of an external
DJ mixer.
• Sampler — Click to access the drop-down menu a nd select the stereo output for Torq’s Sampler.
• Line Input A — Click to access the drop-down menu an d select the stereo input pair for use as
the Line Input for Channel A of the Mixer.
• Line Input B — Click to access the drop-down menu an d select the stereo input pair for use as
the Line Input for Channel B of the Mixer.
• Control Input A — Click to access the drop-down m enu and select the stereo input to which
your left turntable or CD player is connec ted. This is also the Control Input used by AMP utate
mode.
• Control Input B — Click to access the drop-down m enu and select the stereo input to which
your right turntable or CD player is connect ed.
✓ Note: When Torq is being used as a ReWire slave (explained earlier i n this guide), the Audio Interface
options will be disabled.