Indicators and Presets, Windows, Active Logic Inputs | Mackie DX8

Windows

About

This provides information about the DX8-PC software application, including the version and personnel credits.

Close Window (ESC)

This closes the window that is currently selected (front-most) on-screen.

Close All (Ctrl+/)

This closes all windows that are currently open on the screen, leaving just the main window open.

Graphic EQ

This toggles the Graphic EQ window open and closed. It duplicates the function of the Graphic EQ button under DSP on the right side of the screen.

Parametric EQ

This toggles the Parametric EQ window open and closed. It duplicates the function of the Parametric button under DSP on the right side of the screen.

Compressor

This toggles the Compressor window open and closed. It duplicates the function of the Compress button under DSP on the right side of the screen.

Audio Input

This toggles the Audio Input window open and closed. It duplicates the function of the Audio In button under Setups on the right side of the screen.

Logic Input

This toggles the Logic Input window open and closed. It duplicates the function of the Logic In button under Setups on the right side of the screen.

Logic Output

This toggles the Logic Output window open and closed. It duplicates the function of the Logic Out button under Setups on the right side of the screen.

Indicators and Presets

This section describes the various boxes and buttons that are available on-screen.

Active Logic Inputs

These light to indicate active logic inputs (e.g., contact closure).

Active Mute Groups

These light to indicate when a Mute Group is active via either a logic input or a remote control.

DX8 – 21

Image 21

Mackie DX8 instruction manual Indicators and Presets, Windows, Active Logic Inputs, Active Mute Groups

Contents

DX8 Digital Audio Mixer Signal Processor With Automixing Table of Contents Introduction KEY Features Input LED Display Front Panel Features Mode Rear Panel Features Outputs A/B SIGNAL-FLOW Diagram Typical Stereo Application Application Diagrams ZoneB Typical Two-Zone Application Secondary Two DX8s in Church Application With Two-ZonesApplication BoardRoom Typical Stereo Application Application DiagramsTypical Two-Zone Application Two DX8s In Church Application Connections AC Power Considerations Connecting the Logic I/OConnecting the Remote BUS Quick Start Start UpSet the Levels Using the Digital Signal Processors Using InputsUsing the BUS a and B Inputs Using the Logic I/O Using the Record OutputDirect Outputs Outputs a and B Front Panel Lock Logic InputsLogic Outputs Installing the Software Upgrading the Software Connecting a PCUpgrading the Firmware Menu Bar OverviewFile Quit Ctrl+Q Configuration File Firmware UpgradeAdvanced DX8 Unit Info Windows Indicators and PresetsActive Logic Inputs Active Mute Groups Save To Preset PresetsClear Edits On Line Views Buttons Automix Compress Audio Setups Start Logic Logic Out Action Definitions Channel Strip Output DSP On/Off Buttons Output Strip DX8 Block Diagram Specifications Inputs / Outputs DX8 Specifications DX8 Disclaimer Service Information Appendix a Logic Input Functions Appendix C Selection Remote Predefined Functions Mackie Designs Inc