User Manual

MP-100

HomePod — Wireless Network Digital Audio Player with FM Tuner

Copyright

Copyright © 2003-4 by Xsense Connectivity, Inc. (dba Macsense Connectivity). All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from Xsense Connectivity, Inc. Xsense Connectivity, Inc. reserves the right to revise this documentation and to make changes in content without obligation among Xsense Connectivity, Inc. to provide notification of such revision or change. All products and their associated features are subject to change or upgrade at the time of the shipment or of the sales.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures are necessary to correct the interference.

Safety Precautions

Follow all warnings and instructions marked on the product.

•Slots and openings on the device are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered.

•Do not use or store HomePod in the environment that exceeds temperature and humidity specifications. Do not place HomePod near a radiator or heat register or in a built-in installation unless adequate ventilation is provided.

•Before cleaning, unplug HomePod from wall outlet. Do not use liquid cleansers or aerosol cleansers. Use a damp cloth for cleaning.

•Do not place cords or cables where they may be walked on or tripped over.

•Be sure to comply with any applicable local safety standards or regulations.

•General-purpose cables are provided with HomePod. The use of any other cables or requirements mandated by local authority is user’s responsibility.

•Cables attached to devices in different locations with different power sources and grounding may cause hazardous voltage. Consult a qualified electronic consultant before installing the product to check if this phenomenon exists and, if necessary, take corrective action.

•Never touch un-insulated telephone wires or terminals unless the line has been disconnected.

•Avoid using telephone equipment or installing the product during an electrical storm.

•Never install HomePod, or any kind of telephone jacks, lines, network cables, or power connections in wet locations.

•Never spill liquid of any kind on HomePod.