Easy Installation
Assigning TCP/IP Values Manually
If you already have a DHCP server on the network, or if you prefer not using the XRouter Pro’s DHCP server to assign TCP/IP values automatically, you can input these values manually.
To enter values for the managing computer’s address manually:
1.Click the IP Address tab from the TCP/IP properties window.
2.In the IP Address field enter “192.168.1.x” where x is any variable of your choice ranging from 2 - 252. Enter 255.255.255.0 in the Subnet Mask field.
(NOTE: No two computers on the same LAN can have the same IP address or an IP address conflict will occur.)
3.Click the DNS tab and enter the DNS IP addresses provided by your ISP in the DNS fields.
4.Click the Gateway tab and enter a value in the Gateway IP address field. The Gateway IP address value must be the same as the XRouter Pro's IP address; (the XRouter Pro’s default IP address is 192.168.1.1).
5.After specifying the settings of TCP/IP click OK and restart Windows to allow the settings to take effect.
11
