Macsense Connectivity MIH-130 user manual Connecting the Power Supply

Easy Installation

2.Plug one RJ-45 connector (of a standard twisted-pair Ethernet cable) to the XRouter Pro’s No. 4 LAN port.

3.Plug the other end of this Ethernet cable into an available port on the network hub.

(NOTE: Multiple network hubs can be connected to the XRouter Pro’s LAN ports No.1-3 if these hubs are equipped with uplink ports. By daisy-chaining a series of hubs, you can connect up to 252 users to the XRouter Pro.)

LAN

WAN

Reset

Connecting the Power Supply

To provide your XRouter Pro with power:

1.Plug the power adapter of the XRouter Pro into an AC power outlet.

2.Plug the other end of the power adapter cable into the power receptacle on the rear panel of the unit.

3.The Power LED on the XRouter Pro’s front panel should be lit immediately.

7