M A G M A

8.After 5-6 seconds the LED will stop flashing and turn off completely.

Remove the card and replace it with a new one, then press the button again.

Remove and replace the respective PCIe card

Ideally the PCIe card that was removed from the system will be replaced with an identical, working card. Replacing that card with one that has a different function or purpose may cause the system to crash due to a mismatch in the resources pre-allocated by the operating system.

9.The LED should start flashing again.

If power should not be applied to this slot, immediately press the button again and the LED will stop flashing and remain off, otherwise go to step 11.

10.After 5-6 seconds the LED will stop flashing and remain on.

After a brief period the new device will be recognized by the system, and it should be added to the list in the “Safely Remove Hardware” dialog

34

Page 42
Image 42
Magma EB2R user manual LED should start flashing again